Live analyzer · growing
Statewide analyzer: feed it from your region
The Mississippi Mesh analyzer at analyzer.msmesh.org collects MeshCore packets heard by observers across the state and labels them with MeshMapper region outlines. It’s just getting started, so we’re asking observer owners in every Mississippi region to add a second feed.
Mississippi Mesh Lite is a lighter, faster view.
Keep your current feeds exactly as they are and add ours alongside them. No login or account needed.
12 observers feeding so far.
Questions? hello@msmesh.org
Broker
Use either endpoint.
mqtt.msmesh.orgwss://mqtt.msmesh.org:443/mqtt Topics
<REGION> is your own region code (for example JAN, GTR, MSY, GPT or MEM). <pubkey> is your observer’s public key.
meshcore/<REGION>/<pubkey>/packets
meshcore/<REGION>/<pubkey>/status Gessaman observer firmware
From the observer’s command line, point the second MQTT slot at either endpoint with set mqtt2.server. Leave the username and password blank.
set mqtt2.preset custom
set mqtt2.server mqtt.msmesh.org
set mqtt2.port 1883Tested on hardware (firmware v1.17.1.5). Bare hostname, no TLS.
set mqtt2.preset custom
set mqtt2.server wss://mqtt.msmesh.org:443/mqtt Taken from the firmware source and not yet tested on a device. The port goes in the URL, so there’s no separate port line.
Region code: mqtt.iata is global. Every slot shares it, so changing it also changes the topics your other feeds (LetsMesh and others) send to. Keep your existing code. Only if it’s blank, set it:
set mqtt.iata <CODE>Check: get mqtt.status shows each slot as ok or failed, for example 1: custom (ok), 2: …
get mqtt.statusHeads-up on slots: boards without PSRAM (Heltec V3, RAK3112) allow only 2 active slots, and every enabled slot counts, plain ones included. If slots 1 and 2 are both in use, you’ll need to swap one out to add ours. PSRAM boards (Heltec V4, XIAO S3) allow 5.
Find your local group
Every region has its own group, settings and chat. Find yours and say hello. They’ll help you get on the air.