Hardware
Radios, repeaters and antennas
You don’t need much to start: one companion radio and a phone. We love spotlighting small US makers, so let’s start there.
Small US builders
These small shops and indie makers build ready-to-go (or nearly ready) mesh radio gear, much of it MeshCore-ready. Stock and options change, so check with the shop before you order.
PeakMesh
Colorado
Hand-built, RAK-based solar nodes (Ultimate, MicroMag, Altitude, Magnet Climber and more) that run MeshCore or Meshtastic.
GrumpyMesh
St. James Parish, Louisiana
Solar MeshCore repeaters (King Peater, Grumpy X and Grumpy Jr) plus the 1 W Grumpy Board.
MeshSmith
Assembled in the USA
1 W LoRa boards (the PiMesh-1W Pi HAT, Photon-1W solar-ready node and EtherMesh-1W PoE) and Outpost aluminum outdoor cases.
Atlavox
Bristol, Rhode Island
The Beacon solar node (RAK4631), which you can order flashed and set up as a MeshCore repeater, plus MeshCore and Meshtastic radios.
SpecFive (Spec5)
Florence, Texas
The Relay Lite, a compact solar repeater you can order with MeshCore firmware.
3D Security LLC (3Dsafe)
Middletown, Connecticut
Small-batch, 3D-printed solar and pole-mount repeaters and nodes for MeshCore and Meshtastic. Many are made to order, so drop them a line first.
Frequency Labs
Michigan
MeshAdv 1 W LoRa HATs for Raspberry Pi, a neat fit for Pi-based fixed repeaters like pyMC_Repeater, a Python repeater for MeshCore.
Mesh Lab
Minnesota
Yeti Wurks solar base-station kits for Meshtastic, plus radios from bigger brands.
Know a small US maker we missed? Let us know, y’all.
Common brands
You’ll also see plenty of gear from these makers. A few favorites to get you started:
Heltec
A go-to for first radios and DIY repeaters.
RAKwireless
Modular WisBlock gear and the WisMesh line.
Seeed Studio
SenseCAP and Wio devices, from pocket trackers to solar nodes.
LilyGO
Handhelds with screens and keyboards, and plenty of boards to tinker with.
These are just a starting point. Ask around in Discord or #msmesh and folks will happily share what works for them.
Tip: before you buy, check that the device is listed in the MeshCore web flasher (flasher.meshcore.io).
What each radio does
Companion
Pairs with your phone over Bluetooth or USB so you can send and read messages in the app. It doesn’t repeat other people’s messages.
Repeater
Sits up high and passes messages along. Repeaters are what give a mesh its range.
Room server
A little bulletin board on the mesh. It keeps recent posts so folks can catch up when they come back in range.
Observer
Also uploads what it hears to an analyzer over the internet, so everyone can see how the mesh is doing. Feed the analyzer.
Solar repeaters
Most repeaters live outdoors on solar power. A typical build has:
- A solar panel sized for your spot and your radio.
- A battery to carry it through nights and cloudy stretches.
- A weatherproof enclosure to keep out rain, bugs and heat.
- Height. A repeater on a tall spot with a clear view hears far more than one tucked down low.
Thinking about putting up a repeater? You might check in with your local group first. They’ll often have tips on what’s worked best around y’all.
Antennas
- Use an antenna made for 915 MHz, the US band.
- Height and line of sight beat power. Get it up high, clear of metal and walls.
- Keep the cable between radio and antenna short. Long runs lose signal.
Find your local group
Every region has its own group, settings and chat. Find yours and say hello. They’ll help you get on the air.