Mississippi Mesh

Getting started

Get on the mesh in five steps

It’s easier than it looks. Here’s how most folks get going, and your local group can help with any step.

Steps

  1. Get a radio

    Start with a companion radio, the small device you pair with your phone. The hardware page covers the basics.

  2. Flash it with MeshCore

    Plug the radio into a computer and open the official MeshCore web flasher. Pick your device and the companion firmware.

    MeshCore web flasherGet the MeshCore app

  3. Use your region’s settings

    Most groups use the standard US settings: the USA/Canada (Recommended) preset in the app, which the MeshCore FAQ lists as 910.525 MHz, SF7, BW62.5, CR5. But each region or group may differ, so ask your local group before you key up.

    Check with your local group to see what’s running in their area and any sub-groups, channels, or region settings. Repeater and channel scopes are listed in Mississippi Regions below.

  4. Join your local group

    Every group has a Discord or Facebook page where folks share settings, repeater news and help. Come say hi. Y’all will fit right in.

    Find your group

  5. Optional: run an observer

    Got a spare radio and Wi-Fi? Set it up as an observer that feeds mqtt.msmesh.org, and help our statewide analyzer see your region.

    How to feed the analyzer

Repeater & companion settings

Mississippi Regions

A region scope is a tag that tells repeaters how far a message should flood, so chatter about Pearl River County stays around Pearl River County instead of bouncing across the whole state.

Repeaters

  1. Add all of the Statewide regions.
  2. Add your primary region.
  3. If you’re near other regions (including other states), add their scope too.

From the repeater’s command line, add each region, then save (firmware 1.15+ allows flooding on new regions automatically):

region put us
region put us-ms
region put us-southeast
region put us-gc
region put us-ms-gpt
region save

Leave * alone; it’s already there. Type region to see what’s set. Full syntax is in the MeshCore CLI docs.

Statewide
ScopeDescription
*unscoped (leave as default)
usthe country
us-msthe state
us-southeastsoutheastern US
us-gcGulf Coast region
Gulfport/Biloxi
Gulfport/Biloxi metro, Bay Saint Louis, Lucedale, Pascagoula, Picayune, Wiggins
us-ms-gptprimary region
us-ms-prcPearl River County
Hattiesburg
Hattiesburg, Collins, Columbia, Ellisville, Laurel, Purvis, Sumrall, Waynesboro. This region is part of us-la.
us-la-msyprimary region
Central MS
Jackson metro, Canton, Carthage, Forest, Hazlehurst, Magee, Vicksburg, Yazoo City
us-ms-janprimary region
Northeast MS
Tupelo, Amory, Columbus, Grenada, Kosciusko, Muscle Shoals, Oxford, Starkville, West Point. Includes a portion of Alabama.
us-ms-neprimary region
golden-triangleStarkville, Columbus, West Point

Companions

In the MeshCore app, set the scope on each channel you use (it’s a per-channel setting):

ChannelScope
public*
#golden-triangle*
#k5prcus-ms-prc
#mississippius-ms
#pearlrivercountyus-ms-prc
#picayuneus-ms-prc
#south-mississippius-ms
#starkville*

Region list courtesy of 🐦‍⬛ Raven and the crew

Find your local group

Every region has its own group, settings and chat. Find yours and say hello. They’ll help you get on the air.

Find your local group